machtpc

Can you plug in hard drive while computer is on?

If external via USB, yes you can plug/unplug while the computer is turned on. However, before unplugging you should see the Safely Remove Hardware icon in the task manager, and stop the external hard drive prior to unplugging.

What happens if I plug in a hard drive while computer is on?

It’s not safe to plug the power cable in while the system is on, but it should be safe to plug the data cable in. So turn the system off first, or else you may kill the drive.

Can you connect hard drive while computer running?

Can I plug in a hard drive while the computer is on? Yes, you can plug in a hard drive while the computer is on. If you’re plugging in an internal drive then never do that, this can result in either motherboard damage or the hard disk damage. Technically you can because the SATA Hard Drives are hot-swappable.

Can you take a hard drive and plug it in and run in on another computer?

Yeah, that’ll work. You’ll need a SATA data cable, and you’ll need to locate an available SATA power cable in the working computer. Plug the drive in, boot the computer, et voila, your drive should be there. If not, open Disk Manager, locate the new disk, and partition and format it for use.

Can you plug in a SSD while the computer is on?

If the port in question supports hot-plugging (a moderately complex question), and you are running Win7, you can. But hot-plugging with a cable is not a good idea; there is too much risk of touching the wrong thing while the system is running. Be very careful.

Can I just unplug my HDD?

When you use external storage devices like USB flash drives, you should safely remove them before unplugging them. If you just unplug a device, you run the risk of unplugging while an application is still using it. This could result in some of your files being lost or damaged.

Is it safe to hot plug a SATA drive?

The SATA controller must be in AHCI or RAID operation mode to support hot plugging. I’ve done it on multiple systems. As long as it’s in AHCI mode it’s worked fine for me.

What do I do if my hard drive is not detected?

  1. Boot the computer and try to catch some noise.
  2. Power off the system.
  3. Disconnect the power cord from the system.
  4. Remove the power cable when the hard disk is not detected, or the hard disk you are trying to fix.
  5. Reconnect the power cord to the system itself.

How is hard drive connected to a computer?

How is a hard drive connected to a computer? An internal hard drive connects to the computer using two means: a data cable (IDE, SATA, or SCSI) to the motherboard and a power cable to the power supply.

Are drives plug and play?

So any external (USB, eSATA, FireWire) HDDs are also hotplug-able. Plug and Play means that user dont need to do anything to make hardware work, except to plug it in. Not just that Operating System must have driver for device, it also must automaticaly install it.

How do I transfer files from old hard drive to new computer?

All you have to do is plug your hard drive into your old PC, move your files and folders from your old PC onto the drive, then plug it into your new PC and reverse the transfer process.

Can I put my hard drive into another laptop?

3 Answers. If the hard drives use the same connector (SATA or IDE) then its possible, but not a certainty. If the controller is SATA, it is possible Win 7 might not recognize it as it could be a newer unknown chipset. However, there is no harm in just putting the drive in and seeing if boots.

Can I put a new hard drive in an old computer?

You can, however, still clone your old drive to your new one. This is possible by connecting your new drive to your PC with a USB-to-SATA cable or an external hard drive dock. Cloning a drive may take some time because of the bandwidth limitations of USB 2.0, but it will complete eventually.

Can you unplug SATA drive while computer is on?

If external via USB, yes you can plug/unplug while the computer is turned on. However, before unplugging you should see the Safely Remove Hardware icon in the task manager, and stop the external hard drive prior to unplugging.

Why is my SSD not being detected?

The BIOS will not detect a SSD if the data cable is damaged or the connection is incorrect. … Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.

Can SSD be hot swapped?

By utilizing a hot-swap system you can easily change out a drive should one fail or remove one of the drives without interrupting the data writing on the other drive. … Because of the flexible nature of SATA drives, hot-swappable HDDs or SSDs are a great option for a huge range of applications.